Electromagnetic Flow Meter Turbine Flow Meter Positive Displacement Type Flow Meter Oval Gear Flow Meter BTU Meters Air Shower Nozzle Heat Exchanger
An ISO 9001 : 2008 Certified Company, Manufacturer & Exporter Of Process Measuring Instruments & Controls
  Home About Dealer Inquiry Contact
Online Quote

Turbine Flow Meter

Our Turbine Flow Meter are designed for the volumetric measurements of liquids & gases. The meters are rugged, reliable & precise instruments suitable for all industrial corrosive & Non – Corrosive Chemicals, Fuels, and Oil & Gases etc. The basic meter consists of a freely suspended bladed rotor positioned axially in the flow stream with the flowing fluid pushing against the blades. The rotational speed of the turbine is proportional to the velocity of the fluid & hence truly represents the volume of the fluid flowing through meter. The rotation of turbine rotor generates electrical pulses in the pick off attached to flow meter housing. The output pulses are amplified & converted to measure flow rate & integration. Turbine sensor with four/six digit batch controller with ICO Relay output contact offered to transfer. Preset qty. Of liquid from main storage tank with automatic flow shut off. We are a credible Manufacturer, Exporter and Supplier of Turbine Flow Meter in India.

Applications :




Vegetable Oil

Hydraulic Oil

Chemical (S.S. With Teflon coating)

Milk plant.


Specifications :

Line Size 6 NB to 200 NB
Measuring Range 0.18 to 750 m3/hr of water / clear liquid 0.5 to 2200 Nm3/hr of Air/Gas at NTP
Display 4 Digit LED for flow rate & 8 Digit LED for totaliser
Transmitter Electronics Integral / Remote
Type of Output 4 to 20 mA DC Optically Isolated
Accuracy +1- 1% F.S. (0.5% Optional)
Linearity +/-0.5%
Repeatability +/-0.2%
Turn down ratio 10 : 1 to 100 : 1
Density / Sp. Gravity Up to 2.95
Viscousity Up to 100 cp
Process Temperature 0-80 Deg C (Special design for high temerature available)
Process Pressure 0-20 Kg/cm2 (Special design for high pressure available)
Material of construction Bearings Tungsten Carbide Sleeve / Rotor ½ SS 410
Power Supply 24 V DC, External
Power Consumption < 1 VA
Response Time < 100 m Sec
Temperature Coefficient +/-0.01 % per 0C
Transmitter Enclosure Flame-proof, IP-65, IIA, IIB CMRI certified
Mounting Flush of Panel




© Copyright CBRO. 2014 All rights reserved. Maintained by suninfy.com