Product Categories
Flange Ultrasonic Level Meter
MODEL: ULT252-2
Contact us
info@cbroindia.com sales@cbroindia.com
Sales Support
+917021306718
Technical Support
+918591988100
Advantages
Flange Ultrasonic Level Meter Advantages
Non-contact, maintenance-free measurement.
Measurement unaffected by media properties, like dc value or density.
Calibration without filling or discharging.
Self-cleaning effect due to vibrating sensor diaphragm.
Application
Flange ultrasonic level meter application
Flange Ultrasonic level meter with ultrasonic level sensors provides continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of the level sensors.
Storage Tank
Pool
Drains
Granary
Wells
Metering Box
Technical Data
Table 1: Flange Ultrasonic Level Meter Technical Parameters
|
Technical Specifications
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Make
|
CBRO
|
|||||||||
|
Model
|
ULT252-2
|
|||||||||
|
Level Range
|
4,6,8,10,12,15,20,30m
|
|||||||||
|
Accuracy
|
0.5%-1.0%
|
|||||||||
|
Resolution
|
3mm or 0.1%
|
|||||||||
|
Display
|
LCD Display
|
|||||||||
|
Analog Output
|
Two Wires 4-20mA/250Ω Load
|
|||||||||
|
Power Supply
|
DC24V
|
|||||||||
|
Environmental Temperature
|
Transmitter -20~+60℃ , Sensor -20~+80℃
|
|||||||||
|
Communication
|
HART
|
|||||||||
|
Protection Class
|
Transmitter IP65(IP67 Optional),Sensor IP68
|
|||||||||
|
Probe Installation
|
Flange, Thread
|
|||||||||
Table 2: Flange Ultrasonic Level Meter Model Selection
|
Measure Range
|
|---|
|
4 4m
6 6m
8 8m
12 12m
20 20m
30 30m
|
|
License
|
|
P Standard Type(Non ex-proof)
I Intrinsically safe (Exia IIC T6 Ga)
|
|
Energy Transducer Material/Process Temperature/Protection Grade
|
|
A ABS/(-40-75)℃/IP67
B PVC/(-40-75)℃/IP67
C PTFE/(-40-75)℃/IP67
|
|
Process Connection/Material
|
|
G Thread
D Flange /PP
|
|
Electronic Unit
|
|
2 4~20mA/24V DC Two Wire
3 4 20mA/24V DC /HART Two Wire
4 4-20mA/24VDC/RS485 Modbus Four Wire
5 4-20mA/24VDC/Alarm Output Four Wire
|
|
Shell / Protection Grade
|
|
L Aluminum / IP67
|
|
Cable Entry
|
|
N 1/2 NPT
|
|
Programmer/Display
|
|
1 With Display
|
Installation
Flange Ultrasonic Level Meter Installation
1:Keep Ultrasonic Level Transmitter perpendicular to liquid.
2:The transducer should not be mounted too close to the tank wall, the bracket can cause strong false echoes
3:Mount the transducer away from the inlet to avoid false echoes.
4:The transducer should not be mounted too close to the tank wall, the build-up on the tank wall cause false echoes.
5:As is illustrated by the figure on the below, the transducer should be mounted on the top of guide tube to prevent the false echoes from turbulence and foam. The guide tube should come with a vent hole at top of the tube to allow the liquid vapor go out of the tube.
6:When you mount the transducer on the solid tank, the transducer must point to the tank outlet.
Other Products in ' Radar Level Meter' category
SEND YOUR INQUIRY
Exported to more than 150 countries around the globe, 10000 sets/month production capacity!
