Product Categories
High Precision Level Meter
MODEL: ULT250-1
Contact us
info@cbroindia.com sales@cbroindia.com
Sales Support
+917021306718
Technical Support
+918591988100
Advantages
High Precision Level Meter Application
To ensure that the ultrasonic transmission to the measured ultrasonic liquid level or material surface occasion.
Suchas: storagetank, chute, pool, Wells, drains, meteringbox, granaryetc.
Application
High Precision Level Meter Advantages
Non-contact, maintenance-free measurement.
Measurement unaffected by media properties, like dc value or density.
Calibration without filling or discharging.
Self-cleaning effect due to vibrating sensor diaphragm.
Storage Tank
Pool
Drains
Granary
Wells
Metering Box
Technical Data
Table 1: High Precision Level Meter Technical Parameters
|
Technical Specifications
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Make
|
CBRO
|
|||||||||
|
Model
|
ULT250-1
|
|||||||||
|
Explosion Proof Grade
|
Exia IIC T6 GA
|
|||||||||
|
Measuring Range
|
10 meters
|
|||||||||
|
Frequency
|
26 GHz
|
|||||||||
|
Temperature:
|
-60℃~ 150℃
|
|||||||||
|
Measurement Precision
|
±2mm
|
|||||||||
|
Process Pressure
|
-0.1~4.0 MPa
|
|||||||||
|
The Signal Output
|
2.4-20mA, HART, RS485
|
|||||||||
|
The Scene Display
|
Four digital LCD
|
|||||||||
|
Shell
|
Aluminum
|
|||||||||
|
Connection
|
Flange (optional)/Thread
|
|||||||||
|
Protection Grade
|
IP65
|
|||||||||
Table 2: High Precision Level Meter Model Selection
|
Measure Range
|
|---|
|
4 4m
6 6m
8 8m
12 12m
20 20m
30 30m
|
|
License
|
|
P Standard Type(Non ex-proof)
I Intrinsically safe (Exia IIC T6 Ga)
|
|
Energy Transducer Material/Process Temperature/Protection Grade
|
|
A ABS/(-40-75)℃/IP67
B PVC/(-40-75)℃/IP67
C PTFE/(-40-75)℃/IP67
|
|
Process Connection/Material
|
|
G Thread
D Flange /PP
|
|
Electronic Unit
|
|
2 4~20mA/24V DC Two Wire
3 4 20mA/24V DC /HART Two Wire
4 4-20mA/24VDC/RS485 Modbus Four Wire
5 4-20mA/24VDC/Alarm Output Four Wire
|
|
Shell / Protection Grade
|
|
L Aluminum / IP67
|
|
Cable Entry
|
|
N 1/2 NPT
|
|
Programmer/Display
|
|
1 With Display
|
Installation
High Precision Level Meter Installation
1:Keep Ultrasonic Level Transmitter perpendicular to liquid.
2:The transducer should not be mounted too close to the tank wall, the bracket can cause strong false echoes
3:Mount the transducer away from the inlet to avoid false echoes.
4:The transducer should not be mounted too close to the tank wall, the build-up on the tank wall cause false echoes.
5:As is illustrated by the figure on the below, the transducer should be mounted on the top of guide tube to prevent the false echoes from turbulence and foam. The guide tube should come with a vent hole at top of the tube to allow the liquid vapor go out of the tube.
6:When you mount the transducer on the solid tank, the transducer must point to the tank outlet.
Other Products in ' Radar Level Meter' category
SEND YOUR INQUIRY
Exported to more than 150 countries around the globe, 10000 sets/month production capacity!
