Integral Display Flange Ultrasonic Flow Meter Manufacturer & Exporter From Maharashtra, india

Product Categories

Flow

Level

Water Analyzer

Clean Room

Cloud M2M Logger

Multi Parameter Transmitter

Multi Parameter Transmitter

Integral Display Flange Ultrasonic Flow Meter

MODEL: CUF700

Flange ultraosnic flow meter is one kind of economy liquid flow meter which mainly measure various of pure liquid,such as:Clean water,Sea water,Dringking water,River water,Alcohol etc. And it is suitable for continuously measuring flow and heat of clean and uniform liquids without large concentration suspended particles or gases industrial environment.

Contact us

Advantages

Accuracy better than ±1.0% High reliability, high performance, low price
Bi-directional flow measurement No moving parts, no wear, no pressure loss,Maintenance-free Measuring conductivity liquid and Non-conductivity liquid Display instantaneous flow,Total flow,Heat,Positive flow,Negative flow High precision machined pipe sections, the sensor is installed before leaving the factory to ensure high measurement accuracy

Food industry

Oil & Gas industry

Chemical industry

Water treatment industry

Trade settlement

Power industry

Technical Data

Table 1 : Integral Display Flange Ultrasonic Flow Meter Main Performances Parameters

TECHNICAL SPECIFICATIONS
Make	CBRO
Model	CUF700
Size	DN15~DN6000
Accuracy	Better than ±1.0%
Velocity range	0~±10m/s
Liquid temperature	0~160℃
Liquid Type	Water, sea water, waste water, alcohol, beer, various kinds of oil etc which can conduct ultrasound single uniform liquid
Pipe material	Steel, stainless steel, cast iron, copper, PVC, aluminum, FRP etc, all kinds Of dense pipeline, can be liner inside
Output signal	1 channel 4-20mA output, inpedence 0-1K ; 1 channel OCT pulse output, pulse width 6-1000ms, (default is 200ms); 1 channel relay output
Input Signal	4-20mA input Connect with three wire PT100, can achieve heat measurement
Communication	RS485 MODBUS RTU
Power supply	DC8-36V or AC85-264V
Protection	IP65
Power Consumption	1.5W

Table 2 : Water temperature and sound speed table

Temperature(℃ )	Sound speed (m/s)	Temperature(℃)	Sound speed (m/s)
0	1403	50	1541
5	1427	55	1546.5
10	1447	60	1552
15	1464	65	1553.5
20	1481	70	1555
25	1494	75	1555
30	1507	80	1555
35	1516.5	85	1552.5
40	1526	90	1550
45	1533.5	95	1547
		100	1543

Table 3 : Ultrasonic flow meter model selection

Size	DN15~DN6000	15~6000	X	X	X	X
Body Material	Carbon steel	C
	SS304	S0
	SS316	S1
Pressure Rate	0.6 Mpa		P1
	1.0 MPa		P2
	1.6 MPa		P3
	2.5 MPa		P4
	Other special		P5
Output	4-20mA,Pulse,OCT,RS485			O
Structure	Integral				I
Structure	Remote				R
Connection	Thread					T
Connection	Flange					F

Installation

Integral Display Flange Ultrasonic Flow Meter Installation Requirement
Generally, the following principles should be followed:

To select a pipe section filled with fluid, such as a vertical part of the pipeline or a horizontal pipe section filled with fluid.

The measuring point should be 10 times the diameter from the upstream and the straight pipe section within 5 times the diameter from the downstream, and the distance from the valve outlet should be as far as possible.

Ensure the temperature at the measuring point is within the working range.

Fully consider the fouling condition of the inner wall of the pipe, and try to select a non-scaling pipe section for measurement. When it cannot be satisfied, fouling should be considered as a lining for better measurement accuracy.

Select pipe sections with uniform and dense pipes that are easy for ultrasonic transmission.

Please refer to the two examples on the right for the selection of measuring points.